Spreading work
43
8
8.3
Instructions for spreading operation with tractor
The intended use of the machine includes compliance with the operating, main-
tenance, and service conditions in accordance with the manufacturer specifica-
tions.
Spreading operation
therefore always includes
preparation
and
cleaning/maintenance
.
Carry out spreading operations as described below.
n
WARNING
Risk of injury caused by spreading material
Ejected spreading material may lead to injuries.
Ensure that nobody is present in the hazard zone.
Preparation
Install spreader at tractor
Close metering slide
Fill in the spreading material
Adjust the spreading width limiter
Spreading
Travel to the spreading location
Open the slide and start spreading
Finish spreading and close the slide
Discharge residual material
Cleaning/maintenance
Open metering slide
Remove spreader from tractor
Cleaning and maintenance
Summary of Contents for K 51
