Rauch AXMAT DUO, Instruction Manual

Page: 16 / 44

Settings 3
12
3.3.4 Normal disc speed
1. Call up the Fertiliser settings > Normal speed menu.
2. Enter speed in rpm.
 The display shows the Fertiliser settings window with the new speed.
3.3.5 Fertiliser class
If you know the fertiliser class, enter this directly.
If you do not know the fertiliser class of the fertiliser used, you can determine this
using the "fertiliser identification system
DIS " special equipment.
Figure 3.3: Fertiliser settings, page 3
1. Call up the Main menu > Fertiliser settings menu.
2. Call up the Fertiliser class [1] menu entry.
3. Activate the corresponding fertiliser class in the selection list.
NOTICE
For optimal empty run measurement you must check for correct entries in the
Fertiliser settings menu.

The values in the Disc and Normal speed menu entries must agree with the
actual settings of your machine.
NOTICE
The "fertiliser identification system DIS " is available in the Fertiliser Chart App .
1