Rauch AXIS-M 30.2, Instruction Manual

Page: 79 / 148

Commissioning
71
7
Mechanical display of the spreading position
The mechanical display of the spreading position is located directly at the right
side of the TELIMAT relative to the direction of travel. The display can be seen
from the driver's cab of the tractor.
Figure 7.21: TELIMAT mechanical display
[A] Limited border spreading position
[B] Normal spreading position
NOTICE
When older control equipment is used, leaks are possible during limited border
spreading. In such case, the TELIMAT may leave the already reached end po-
sition (lower position) again. Therefore, return the TELIMAT to the end position
at regular intervals in order to prevent spreading errors.
A B