Rauch AXIS-M 30.2, Instruction Manual

Page: 74 / 148

Commissioning 7
66
Example of full border spreading during late fertilising
(Serial equipment for TELIMAT and/or special equipment for T25):
Figure 7.18: Full border spreading during late fertilising
Full border spreading during late fertilising refers to a spreading technique in
which a bit more fertiliser lands beyond the boundary of the field. Therefore, there
is just a slight underfertilisation at the field boundary.
The following settings are to be applied to the machine according to the fertiliser
chart:
Specified parameters :
Type of fertiliser: KAS BASF
Application rate: 150 kg/ha
Working width: 24 m
Forward speed: 12 km/h

Mounting height: 0/6 (A = 0 cm, B = 6 cm)

Drop point: 6.5

Metering slide adjustment: 90

Spreading disc type: S4

PTO speed: 540 rpm

TELIMAT settings: S13