Rauch AXEO 16.1, Instruction Manual

Page: 63 / 136

Machine settings
55
7
7.4 Adjusting the drop point
Altering the drop point is used for adapting to different spreading materials and
spreading patterns.
The drop point is set at the alphabetic scale of the scale plate. For this purpose,
set the stop to the position determined according to the fertiliser chart.

Adjustment towards A : The centre of gravity of the spreading pattern is shift-
ed towards the left (in direction of travel).

Adjustment towards M : The centre of gravity of the spreading pattern is shift-
ed towards the right (in direction of travel).
Symmetric spreading pattern
Figure 7.3: Symmetric spreading pattern
Asymmetric spreading pattern
Figure 7.4: Spreading to the left
(viewed in the direction
of travel) Figure 7.5: Spreading to the right
(viewed in the direction
of travel)