Rauch AXENT Series, Operator'S Manual

Page: 152 / 170

General maintenance and servicing 9
146
9.11.4 Replacing the oil and oil filter
1. Before draining the oil, place a collecting container of sufficient volume
(at least 60 litres) under the container.
The oil drain cock is located under the container between the filter cartridge
and the adjustment unit for the towing bar suspension.
7. Screw on the new oil filters.
2. Open the hydraulic tap [1].
3. Allow the residual oil to flow
into the collection container.
Figure 9.26: Draining the oil
4. Close the hydraulic tap.
5. Dismantling the oil filter at the
control block
Figure 9.27: Oil filter, control block
6. Dismantle the oil filter under
the container.
Figure 9.28: Oil filter, towing bar suspension
1