Rauch AXENT Series, Operator'S Manual

Page: 132 / 170

General maintenance and servicing 9
126
9.3.2 Draining the cleaning water
After cleaning, there may still be some water in the container of the AXENT 100.1
large area spreader.

Cleaning flap position and lever setting: See 3.11.2: Instruction stickers and
nameplate, page 22 .
9. Push in the lever of the cleaning flap.

The cleaning flap is closed.
After cleaning, we recommend treating the dry machine, especially the
stainless steel parts , with an environmentally friendly anti-corrosion agent.
A suitable polishing kit can be ordered from authorised dealers to treat the rust
spots.
4. Clean the guide rollers with a
soft water jet.
5. Take the side cover and
place the lower sheet metal
hooks [1] in the holders [2] of
the frame.
6. Close the side cover
upwards by hand.
 The lock engages.
 The side cover is secured
in closed position.
Figure 9.4: Fitting the side cover
1
2
7. Open the maintenance flap
at the front in the direction of
travel.
8. Pull the lever [1] of the
cleaning flap.
 The cleaning flap opens.
 The water is drained.
Figure 9.5: Lever of the cleaning flap
1