Rauch Axent Isobus, Instruction Manual

Page: 65 / 74

Loading with AXENT ISOBUS machine control unit
59
5
5.2 Loading in manual operating mode
Loading is started and stopped by pressing the Start loading key if a spreader
side is empty. The sensor conditions signal the required steps.
Requirement:

The Manuel operating mode is selected.
- See : Operating mode selection, page 35 .

The spreading operation is started.
Function/control Operating screen display

One of both level sensors (LLST or LRST) re-
ports empty.

Press Start loading .

Loading is active.

Open the pre-metering slides.

The conveyor belt starts up simultaneously.

Fertiliser flow runs into the spreading unit
hopper.

Adjust the conveyor belt speed and the open-
ing of the pre-metering slides.

Both level sensors (LLST or LRST) are
dampened.