Rauch Axent Isobus Instruction Manual Download Page 55

Page: 55 / 74

Operation AXENT ISOBUS

4.11

Weighing/Trip counter

This menu provides values regarding spreading work carried out and functions
for weighing operation.



Open the

Main menu > Weighing/Trip count.

menu.



The

Weighing/Trip count.

menu is displayed.

Figure 4.19:

Weighing/Trip counter menu

Sub-menu

Meaning

Description

Trip counter

Only for lime operation

: Display of the ap-

plied spreading quantity, area spread and
spread distance.

Page 50

Rest (kg, ha, m)

Only large area spreader with weighing
function

: Display of the residual quantity in

the hopper.

Page 51

Metre counter

Display of the distance travelled since the last
reset of the meter counter.

Reset (zero-
ing) by pressing

C/100 %

Zero scales

Only large area spreader with weighing
function:

Weighing value for empty scales is

set to "0 kg".

Page 52

Summary of Contents for Axent Isobus











































































Search results

Summary of Contents for Axent Isobus

Reviews:

Brands by name

Popular brands

Rauch Axent Isobus, Instruction Manual

Search results

Summary of Contents for Axent Isobus

Reviews:

Brands by name

Popular brands