Rauch Axent Isobus, Instruction Manual

Page: 28 / 74

Operation AXENT ISOBUS 4
22
Activation:

Press the ON/OFF switch .
 After a few seconds, the start-up screen of the machine control unit is
displayed.
 Subsequently, the control unit displays the Start diagnosis for a few sec-
onds.
 Afterwards, the operating screen is displayed.
Figure 4.1: Start AXENT ISOBUS
[1] ON/OFF switch
Requesting the status of the rear cover
The rear cover is important safety equipment for safe machine operation. Loading
cannot be realized if the rear cover is open.
The rear cover is equipped with a switch. The switch reports the open or closed
position of the rear cover to the machine control unit. If the rear cover is open, all
actuators controlled via the machine control unit are stopped (conveyor belt, pre-
metering slide, comb roller, hopper cover).
NOTICE
If the rear cover is open, an error message is displayed. See 6.1: Meaning of the
alarm messages, page 63

All outputs are de-energized, all functions are deactivated ,
!
1