Rauch AXENT 90.1, Operator'S Manual, Page: 49 / 126

Check the following specific preconditions:
• Are both the tractor and the machine safe to operate?
• Does the tractor comply with the mechanical, hydraulic, and electrical requirements?
• Does the tractor comply with the requirements defined by the technical data of the towed machine
(towed load, static load, etc.)?
• Is the machine securely positioned on level and solid ground?
• Is the machine properly secured against rolling?
• Is the ISOBUS terminal installed in the tractor and functional?
• Is the combination of the connection equipment (towing eye - pin coupling or coupling bracket -
ball coupling) admissible?
Fig. 22: Order of connecting the machine lines to the tractor
[1] Conveyor belt hydraulic line
[2] Conveyor belt hydraulic line
[3] Hopper cover hydraulic line
[4] Hopper cover hydraulic line
[5] Pneumatic control line (pneumatic brake)
[6] Pneumatic line of the compressed air tank
(pneumatic brake)
[9] ISOBUS connector
[10] Lighting connector
u Position the tractor at the machine.
u
Switch off the tractor engine. Remove the ignition key.
6. Commissioning
AXENT 90.1 5903360
49