Rauch AERO ISOBUS, Complementary Instructions

Page: 58 / 66

u Fill the hopper with fertilizer.
In order to achieve an optimum spreading result in the AUTO km/h operating mode, a calibration
should be carried out before starting spreading.
u Execute a calibration in order to determine the revolutions/kg of the metering rollers or enter the
value manually.
u Press Start/Stop.
The spreading starts.
5.3 Spreading with the MAN km/h operating mode
If there is no speed signal, the MAN km/h operating mode is active.
u Access the menu Machine settings > AUTO/MAN mode.
u Select the MAN km/h menu item.
The display shows the input window Forward speed.
u Enter the value for the forward speed during spreading.
u Press OK.
u Configure the fertilizer settings:
w Application rate (kg/ha)
w Turns/kg
u Fill the hopper with fertilizer.
In order to achieve an optimum spreading result in the MAN km/h operating mode, a calibration is
to be carried out before starting the spreading.
u Carry out a calibration in oder to determine the revolutions/kg of the metering rollers or enter the
value manually.
u Pressing Start/Stop
The spreading starts.
Always observe the set forward speed during spreading.
5. Spreading operation
58
5903001 AERO ISOBUS