Rational iVario Original Instructions For Use Download Page 23

Page: 23 / 96

4 | Working with the unit

Original instructions for use

23 / 96

Vegetables, e.g., potatoes

1. Insert the core temperature probe into the thickest part of the meat, all the way to the handle.

Soups, sauces, and desserts

1. Place the core temperature probe into the pan so that the core temperature probe is completely immersed in

the liquid.

2. When stirring the liquid, make sure to keep the core temperature probe in the pan.

3. When closing the pan lid, make sure that the core temperature probe is fully immersed in the liquid.

Products of different sizes

1. Start by inserting the core temperature probe into the smallest piece.

2. Once that piece has reached the desired core temperature, remove the small pieces from the core temperature

probe, and take them out of the pan.

3. After that, insert the probe into a larger piece and use the

Reinsert

option to continue the cooking path.

Core temperature probe not detected

The display will show this symbol:

1. Place the core temperature probe as described in these instructions for use.

2. Confirm the correction.

The cooking path will be implemented correctly. If you do not confirm the correction, the cooking path will be
canceled and you will need to restart it. A few cooking paths, such as

low-temperature cooking

, will continue

running despite the error.

4.12

Using the hand shower

The hand shower has two spray modes: spray

(A) and jet

(B).

Summary of Contents for iVario

































































































Search results

Summary of Contents for iVario

Reviews:

Related manuals for iVario

Brands by name

Popular brands

Rational iVario, Original Instructions For Use

Search results

Summary of Contents for iVario

Reviews:

Related manuals for iVario

Brands by name

Popular brands