Rational iVario Original Instructions For Use Download Page 16

Page: 16 / 96

4 | Working with the unit

16 / 96

Original instructions for use

1. You can set cooking paths and programs as favorites while in iCookingSuite or programming mode.

2. Press this button:

3. Press this button:

All cooking paths and programs marked as favorites will be displayed.

4.3.3

Date, time, status

The footer bar always shows the current date and time, as well as the status of the following ports and
connections:

USB stick connected

This symbol indicates that there is a USB stick plugged into the unit.

Network connection

This symbol indicates that your unit is connected to a LAN network. If a network error occurs, this symbol will be
shown:

WLAN connection (optional)

This symbol indicates that your unit is connected to a WLAN network. The connection quality is very good.

If connection quality decreases, these symbols will be shown:

If a connection error occurs, this symbol will be shown:

Please note that this function is optional on 2-XS models.

Error report

This symbol indicates that an error message is being shown on the display.

ConnectedCooking connection

This symbol indicates that your unit is connected to ConnectedCooking. If your unit is not connected to
ConnectedCooking, this symbol will be shown:

4.3.4

Actions

The following symbols may be shown whether or not a cooking path is currently in process.

Symbol

Function

Open pan lid automatically [

}

18]

Summary of Contents for iVario

































































































Search results

Summary of Contents for iVario

Reviews:

Related manuals for iVario

Brands by name

Popular brands

Rational iVario, Original Instructions For Use

Search results

Summary of Contents for iVario

Reviews:

Related manuals for iVario

Brands by name

Popular brands