Rational iVario 2-XS, Original Installation Manual

Page: 30 / 56

6 | Electrical connection
30 / 56 80.06.562_IM_2-XS_ 2-S_en-INT
6 Electrical connection
DANGER
High voltages when connecting to the mains power
Danger to life due to high voltage.
n
Disconnect from the power supply.
n
Make sure the unit is disconnected from the power.
DANGER
Electric shock from incorrect connection
There is a danger to life if the wires are incorrectly connected.
Connect the wires correctly as described according to their colour coding.
CAUTION
Risk of injury due to improper installation
Use an accessible all-pole disconnection device provided by the customer
with a minimum of 3 mm [0.12 inches] contact gap.
NOTICE
Mains voltage does not correspond to unit voltage
Before connecting, check whether the mains voltage corresponds to the
required voltage on the type plate of the unit.
6.1 Regulations for electrical connection
n
Adhere to the regulations of the VDE and the local energy supply compan-
ies.
n
Connect the unit in accordance with the applicable regulations of your
country.
n
Connect the unit to a standard energy supply network.
n
The amp draw, contactors and cable cross-sections depend on the follow-
ing factors:
– Local regulations
– Cable length
– Cable quality
– Power supply
n
For a proper electricity connection, adjust the power ratings to the local
circumstances and requirements.