5 | Intelligent cooking - iCookingSuite
Operating instructions
37 / 112
Core probe in food
You will be prompted to insert the core probe into the food.
Pierce
You will be prompted to pierce the food, e.g. crispy pork.
Fill up
You will be prompted to fill up the container with liquid, e.g. for braised dishes.
Mix
You will be prompted to mix the food.
5.4.4
Information
During a cooking process, the cooking steps the unit is currently performing will be displayed.
Preheat
The unit will be preheated to the temperature that is set either as the standard setting in the manual modes or in
the intelligent cooking processes.
Residual time
The intelligent cooking process stills needs the time displayed to finish.
Cooking process end
The end of the cooking process has been reached.
5.4.5
Options
If you have started a cooking path, all the available options are displayed. You can already select the
Overcrust
and
Maintain
options when the cooking path is running. You can only select the options
Change core temperature
probe
,
New batch
,
Continue with time
and
Heat up to output temperature
when the end of the cooking path has
been reached.
Hold
With this option, either the cooking cabinet climate or the core temperature of the food is held for a certain time. If
you select this option, the food will be held at the preset cooking cabinet temperature or the core temperature for
up to 24 hours. This prevents overcooking. To keep cooking losses as low as possible, it is recommended that the
food only be left in the cooking cabinet with the
Hold
option for a short time.
In some cooking paths, such as low-temperature roasting, the
Hold
option is the last cooking step and is
automatically started once the desired cooking result has been achieved. If you are cooking food of different sizes,
plan a longer hold phase so that all the pieces of food reach the desired core temperature.
Well-matured meat, smaller meat pieces and game should not stay in the cooking cabinet with the
Hold
option for
too long. Very young and insufficiently matured beef will on the other hand become tender.
1. To adjust the parameters of the
Hold
option, press the button:
2. Adjust the parameters as required.
>>
When the end of the cooking path has been reached, the
Hold
cooking step is automatically started.
Move
Select this option if you are cooking foods of different sizes or different foods with different cooking levels using
the core probe:
1. If the set core temperature is reached, open the cooking cabinet door.
2. Insert the core probe into a larger piece of the food or the food with the higher core temperature.
3. Remove all the smaller pieces of the food from the cooking cabinet.
