Ratel ET20, Manual

Page: 77 / 302

Back to START
Ver. 1.4 18.01-2019
5.3 Change CO2 canister
Inlet size Ø200-Ø500 and
Bench Inlet
•
5.3.1 Take out the Lock pins
•
5.3.2 Lift of the Outer container
•
5.3.3 Take out the CO2 canister
•
5.3.4 Insert the CO2 canister
•
5.3.5 Put back the Outer container
•
5.3.6 Insert the Lock pins
Back to Service
Go
Go
Go
Go
Go
Go
NOTE that insert and
replacement of the CO2 canister in
Atex labeled equipment must NOT be
performed within the Atex zones (zone
classified areas).
Read about Atex zones
HERE