Ratel ET20, Manual

Page: 113 / 302

Back to START
Ver. 1.4 18.01-2019
7. New Location
7.1 Demount the trap
7.1.1 PVC manhole
7.1.2 Concrete manhole
7.1.3 Bench Trap
7.2 Fix the contactarm over the
contact on the trap
7.3 Demount the trap in the APP
7.4 Turn off the repeater
7.5 Take down the Communication module
7.6 Move all parts to the new location
7.7 Prepare the trap for mounting
7.8 Remount trap
7.8.1 PVC manhole
7.8.2 Concrete manhole
7.8.3 Bench Trap
Go
Go
Go
Go
Go
Go
Go
Go
Go
Go
NOTE that a valid authorization is
required under applicable
legislation to mount the RatTraps
in the sewersystem
Go
Go
ALWAYS remember to use Atex-
labeled equipment in Atex zones
(zone-classified areas), as well as to
check that all Atex-labeled devices
are intact and correctly assembled
before mounting in Atex zones
Read about Atex zones
HERE