14
Cleaning instructions
To ensure optimal performance of the unit,
cleaning has to be carried out at regular
intervals. Please consult authorised dealer.
• Switch off the power supply and unplug before
cleaning.
• Do not touch the aluminium fi n, sharp parts may
cause injury.
• Do not use benzine, thinner or scouring powder.
• Use only soap ( pH 7) or neutral household
detergent.
• Do not use water hotter than 40 °C / 104 °F.
Indoor unit
Wipe the unit gently with a soft,
dry cloth.
Front panel
Wash gently and dry.
Remove the front panel
POWER
TIMER
NANOE-G
POWERFUL/QUI
ET
Raise
Pull out
1
2
Close it securely
POWER
TIMER
NANOE-G
POWERFUL/QUI
ET
Insert at both sides
1
Press both ends of the front panel
3
Close down
2
nanoe-G Generator
Every 2 weeks
• Clean with dry cotton bud.
• Do not touch during operation.
Air fi lters
Every 2 weeks
• Wash/rinse the fi lters gently
with water to avoid damage to
the fi lter surface.
• Dry the fi lters thoroughly under shade, away
from fi re or direct sunlight.
• Replace any damaged fi lters.
Remove air fi lter
Attach air fi lter
Insert into the unit
For seasonal inspection after extended
non-use
• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• After 15 minutes of operation, it is normal to
have the following temperature diff erence
between air inlet and air outlet vents:
COOL: ≥ 8 °C / 14.4 °F
For extended non-use
• Activate nanoe-G operation for 2~3 hours as
an alternative to remove moisture left in the
internal parts thoroughly to prevent mould
growth.
• Turn off the power supply and unplug.
• Remove the remote control batteries.
Indoor unit
POWER
TIMER
NANOE-G
POWERFUL/QUI
ET
Aluminium fi n
Front panel
Air fi lters
nanoe-G
Generator
ACXF55-04350_YS0717-0-0-0.indb 14
ACXF55-04350_YS0717-0-0-0.indb 14
5/12/2017 11:34:22 AM
5/12/2017 11:34:22 AM
