Hardware Installation
PixelStor 5000 User Manual
Rev. 1, May 2013
4-59
Reboot the remote controller with the backup copy moving IP address and Disk Groups
to the local controller
Load the KDI into the backup location on the local controller (typically takes 3-4
minutes).
Reboot the local controller moving IP address and Disk Groups to the remote controller
Restore IP addresses
Restore Disk Groups to primary controller assignments (assuming minimal or no traffic)
Synchronize backup copy with new KDI (typically takes 3-4 minutes).
Messages are presented in the Upgrade Manger page Upgrade Status area showing the
progress throughout the upgrade process. Command response and Storage Manager Refresh
will slow during the final step that synchronizes the copies of the KDI.
Figure 4-44 Upgrade Manager
To upgrade the system software:
1. Click on the System Upgrade icon in the Options page
2. Enter the software filename or use the Browse button to select a new software image
3. Start the upgrade by clicking on the GO button
4.3.6
Inspection Read Options
Inspection Read is a utility designed to proactively scan the disks in the storage array to identify
any faulty disks before the user attempts to access them.
