Rasilient ApplianceStor 30R User Manual Download Page 128

Page: 128 / 131

Advanced System Use & Maintenance

User Manual

ApplianceStor 30

July 2012

109

VCORE1 Voltage, 3.3V Voltage, +5V Voltage, +12V Voltage, VBAT Voltage, +3VSB Voltage, +1.5V
ICHVoltage

The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select Ignore if you do not want to detect this item.

Boot menu

The Boot menu items allow you to change the system boot options.

Figure 129 - Boot Menu

Setup Prompt Timeout [xx]

Use the <+> and <-> keys to adjust the number of seconds to wait for setup activation key.

Bootup NumLock State [On]

Allows you to select the power-on state for the NumLock. Configuration options: [Off] [On]

Full Screen Logo [Enabled]

Allows you to enable or disable the full screen logo display feature. Configuration options:
[Disabled] [Enabled]

Set this item to [Enabled] to use the RASILIENT SYSTEMS MyLogo2™ feature.

Summary of Contents for ApplianceStor 30R




































































































































Search results

Summary of Contents for ApplianceStor 30R

Reviews:

Brands by name

Popular brands

Rasilient ApplianceStor 30R, User Manual

Search results

Summary of Contents for ApplianceStor 30R

Reviews:

Brands by name

Popular brands