6
Regulatory and Integration Information
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and identification, this system is assigned a serial
number. This system serial number can be found on the product label, along with the required approval
markings and information. When requesting certification information for this product, always refer to this
serial number. This serial number should not be confused with the marketing name or model number.
Product Safety Compliance
This system complies with the following safety requirements:
Table 1: Safety Compliance
IEC 60950-1:2005 + A1:2009 + A2:2013/
Safety of Information Technology Equipment
EN
60950-1:2006
+A11:2009
+A1:2010
+A12:2011 +A2:2013
Safety of Information Technology Equipment
Worldwide Safety approvals can be supplied upon request. Please contact your sales representative for
approvals.
Product EMC Compliance
This product has been tested and verified to comply with the following electromagnetic compatibility (EMC)
regulations.
FCC CFR Title 47 Part 15 Subpart B: 2019 Class A
CISPR 22: 2008, ANSI C63.4: 2014
ICES-003 Issue 6: 2016 Class A
Communications Commission Notice
Part 15 of the Federal Communications Commission (FCC) Rules and Regulations has established Radio
Frequency (RF) emission limits to provide an interference-free radio frequency spectrum. Many electronic
devices, including computers, generate RF energy incidental to their intended function and are, therefore,
covered by these rules. These rules place computers and related peripheral devices into two classes, A and
B, depending upon their intended installation. Class A devices are those that may reasonably be expected
to be installed in a business or commercial environment. Class B devices are those that may reasonably be
expected to be installed in a residential environment (for example, personal computers). The FCC requires
devices in both classes to bear a label indicating the interference potential of the device, as well as
additional operating instructions for the user.
