9
Rasha Professional A/S | 1800 Rustin Ave, Riverside, CA, 92507 | 951-654-3585
Rashaprofessional.com | [email protected]
This device can be used in the following modes:
▪
DMX Address
▪
Auto Mode
▪
Slave Mode
▪
Network Setting
Pixel point/Pitch
40pixel /25MM
Standard
1 meter
Light Source
40 SMD LED
,
RGB Fri-colored
Power
15W
Material
Aluminum
IP Rate
25
Beam Angle
120 degree
Dimensions(L*W*H)
1000*30.5*25.5MM
DMX/Art-net Channels
8CH/120CH
Cover Color
Clear/Frosted/Black/Milky(Replaceable)
control mode
Auto-run,DMX 512,Art-net,Kling-net,Master-slave
Controller Box
Controllable 32 STRIP(Each output 8 STRIP)
5.2. Software Version
*Press MENU to enter the menu.
*Navigate to <Software Version> with UP or DOWN and press ENTER to confirm.
5.3. Auto Mode
The device starts running in Auto mode after connection to the mains. This mode allows you
to use the device without controller.
Here you can select from 20 internal programs and also set the program speed.
*Connect the device to the mains to switch it on.
*Press MENU to enter the menu.
*Navigate to <Auto Mode> with UP or DOWN and press ENTER to confirm.
*Select <PROGRAM> with UP or DOWN and press ENTER to confirm.
*Select an option with UP or DOWN and press ENTER to confirm.
*Select <SPEED> with UP or DOWN and press ENTER to confirm. Select a speed with UP or
DOWN and press ENTER to confirm.
5.4. Slave Mode
Notes
▪
The Slave mode allows for connecting several devices to a single master device in a
daisy chain.