manualshive.com logo in svg

Raritan SX32, Installation And Operation Manual, Page: 73 / 178

Share
Download
Raritan SX32 Installation And Operation Manual Download Page 73

C

HAPTER 

4:

 

C

ONSOLE 

F

EATURES

 

63  

 

Upgrade 

The Upgrade feature allows an Administrator to upgrade the Dominion SX unit's firmware/application to a 
newer version of firmware. Firmware and application upgrades preserve user-defined settings, so the unit 
does not need to be re-configured after the upgrade procedure is complete.  

In order to perform a firmware upgrade, the Administrator must download the upgrades file(s) onto a local 
FTP server and needs the IP address of the FTP server and the file path to the upgrade file(s). Many 
upgrades can be performed "anonymously" from the FTP server, and the default settings of this screen are 
for an anonymous upgrade. However, some FTP servers require a user name and password. If this is the 
case, the Administrator can uncheck the "Anonymous" box and enter the correct user name and password 
for the FTP server. 

Once the upgrade is initiated, the status bar will indicate the progress of the upgrade and a pop-up window 
will notify the user once the upgrade procedure is complete. 

 

Figure 67 Upgrade Display  

Upgrades can be done of the complete software (AmpAdmin package) and the various applications 
(AmpApp package) supplied by Raritan. The upgrade steps are similar for both cases. 

 

To Perform a Complete Software Upgrade: 

1.

 

Click on the [

Upgrade

] button in the left panel. 

2.

 

Enter the 

IP Address

 where the software package is located. 

3.

 

Enter the 

File Path

 to the software package, for example

, /pub/Dominion/AmpAdmin

. 

4.

 

Enter 

FTP Username

 and 

Password

, if required. 

5.

 

Click on the [

Upgrade

] button. 

6.

 

The unit will access the FTP server and download and install the file(s) onto the unit. 

7.

 

The unit will automatically reboot after the software is installed. 

Important! During an upgrade procedure, do not attempt to access any unit features or functions, 

including, but not limited to, Reset and Exit. Interrupting the upgrade procedure can cause 
memory corruption and render the unit non-functional. Such an action may void your warranty or 
service contract, and in such a case unit repair/replacement costs are solely the responsibility of 
the user. 

Summary of Contents for SX32



















































































































































































Reviews:

No comments