manualshive.com logo in svg

Raritan SX32, Installation And Operation Manual, Page: 59 / 178

Share
Download
Raritan SX32 Installation And Operation Manual Download Page 59

C

HAPTER 

4:

 

C

ONSOLE 

F

EATURES

 

49  

 

•

 

User certificate and active default certificate. 

•

 

Pending CSR and active default certificate 

 

Figure 50 Certificate Configuration Display  

Default Certificate  

The unit ships with a 1024-bit self-signed certificate signed by Raritan. When a user powers up the unit for 
the first time, an SSL certificate is generated that is associated to the default IP address 

192.168.0.192

. 

Once the unit is configured with its new IP address, the unit reboots and uses the new IP address to 
generate a new certificate.  When the 

Default Certificate 

radio button is selected. three buttons are 

available at the bottom of the Certificate screen: 

1.

 

[

Generate Default Certificate

]: Click on this button to regenerate the certificate provided by Raritan. 

Please note that generating the certificate will cause the unit to reboot. 

2.

 

[

View Certificate

]: Click on this button to view the currently installed default certificate. This option 

can also be used to copy the certificate (generated by Raritan) and install it on the client desktop. 
Please refer to 

Appendix C: Certificates 

for more information.  

3.

 

[

Activate Default Certificate

]: Click on this button to activate the default certificate. This option can 

be used to replace the user-installed certificate with the default certificate provided by Raritan. Please 
note that activating the default certificate will cause the unit to reboot.  

  

Certificate Status 
Indicator 

Summary of Contents for SX32



















































































































































































Reviews:

No comments