Raritan SX32, Installation And Operation Manual, Page: 39 / 178

C
HAPTER
4: C
ONSOLE
F
EATURES
29
URL with Port Number
1. Type the following URL into the browser's location bar: https://<IPAddress>/dpa.htm
−
IPAddress : This is the IP Address of the unit. This can be either the actual IP address of the unit
or IPAddress assigned for a modem.
−
“ portnumber ”: Port number for which a console is required.
Note: https must be used for direct port access. http cannot be used.
Example:
https://192.168.50.81/dpa.htm?port=“1”
2. The Direct Port Access display will appear.
3. Enter Login Name and Password and click on the [ Login ] button.
4. When the security warning appears (only once for the session); click on the [ Yes ] button.
5. The console display will appear.
Figure 33 Direct Port Access Display
To exit the application from direct port access, close the Raritan Console window and close the browser
window (by selecting
File
Æ
Close , or by clicking on the “X” in the top right-hand column).
Error Conditions
If the user name, password, or port number is invalid or incomplete, an error message will be displayed in
the browser.
Invalid Port Specified:
If the port specified in the URL is invalid, the user is requested to login again with the correct user name
and password, and a valid port number:
Figure 34 Invalid Port Number Error Display