Raritan SX32 Installation And Operation Manual Download Page 27

Page: 27 / 178

HAPTER

ONSOLE

EATURES

Write Access

The user with Write Access can send commands to the target device. Write Access can be transferred
among users working in RaritanConsole via the Get Write Access command from the Emulator drop-down
menu.

To Obtain Write Access:

Click on

Emulator

in the main menu.

Select

Get Write Access

from the drop-down menu.

Figure 20 Get Write Access Command

You now have Write Access to the target device, as indicated by the green block located before Write
Access in the status bar.

When another user assumes Write Access from you, loss of Write Access is indicated by a red block
before

Write Access

in the status bar. A message alerting the user who currently has Write Access

appears to tell that user that another user has taken over access to the console.

Summary of Contents for SX32



















































































































































































Search results

Summary of Contents for SX32

Reviews:

Raritan SX32, Installation And Operation Manual, Page: 27 / 178

Search results

Summary of Contents for SX32

Reviews: