Raritan SX32 Installation And Operation Manual Download Page 19

Page: 19 / 178

HAPTER

NSTALLATION

11.

Click on the [

Save

] button. A confirmation window will appear; click [

] to accept all data, or click

[

Cancel

] to return to the Configuration screens.

Figure 9 Confirm Save Window

12.

If you click [OK], Dominion SX must reboot. A confirmation window will appear; click [

] to

reboot the SX, or click [

Cancel

] to return to the Configuration screens.

Figure 10 Confirm Reboot Screen

13.

Dominion SX will automatically disconnect to update the configuration. A confirmation window will
appear; click [

Figure 11 Confirm Disconnection Screen

Figure 12 Logged off Dominion SX Screen

14.

Dominion SX will restart; once you see the Login screen, log into the unit and begin using Dominion
SX as described starting in

Chapter 3: Operation

Summary of Contents for SX32



















































































































































































Search results

Summary of Contents for SX32

Reviews:

Raritan SX32, Installation And Operation Manual, Page: 19 / 178

Search results

Summary of Contents for SX32

Reviews: