Raritan SX32 Installation And Operation Manual Download Page 156

Page: 156 / 178

146 D

OMINION

NSTALLATION AND

PERATIONS

ANUAL

Extensions to TCL

Various extensions have been incorporated into TCL to support functions to interact with the
RaritanConsole unit. The command

info comm amp

(executed in a Script Shell Window) lists all the

commands that are supported.

ampsetconfiguration, ampaddsubscription, amprmsubscription, ampsetipacl, amprmipacl, ampadduser,
amprmuser

are commands that make configuration changes to the Raritan unit.

ampsave

must be executed

in order for the changes to become effective, and may be executed at the end of executing a set of these
commands or after each command. Please note that in some cases (network),

ampsave

causes the unit to

reboot. Use

ampreload

to revert changes before a save is executed.

ampgetconfiguration

Returns a list of categories that can be displayed

Usage: ampgetconfiguration

% ampgetconfiguration

network

modem

datacom

smtp

radius

If a specific category is specified, then the data for that category will be displayed.

Usage: ampgetconfiguration <category><port_number>

•

Category

: can be network, datacom, smtp, and radius

•

Port_number

: valid port number, applies only to datacom category; otherwise not used

% ampgetconfiguration network

Hostname: RaritanConsole_C3200

IP:10.0.1.41

SubnetMask:255.0.0.0

Gateway:10.0.1.41

PortAddress:2398

TerminalType:VT100

ampsetconfiguration

Sets the specified field to the value passed. Returns an error if the interpreter cannot get the config lock.

Usage: ampsetconfiguration <category> <field_name> <value>

•

Category

: network, datacom, smtp, radius

•

Field_name

: field to be altered in a particular category

•

Value

: new value

Setting a specific parameter is done as follows (changing a port configuration):

% ampsetconfiguration network portaddress 2398

configuration successful

% ampsave

Important! An ampsave command must be executed in order for any changes to take effect. In the
instance above, a reboot occurs.

Summary of Contents for SX32



















































































































































































Search results

Summary of Contents for SX32

Reviews:

Raritan SX32, Installation And Operation Manual, Page: 156 / 178

Search results

Summary of Contents for SX32

Reviews: