manualshive.com logo in svg

Raritan SX32, Installation And Operation Manual, Page: 140 / 178

Share
Download
Raritan SX32 Installation And Operation Manual Download Page 140

130 D

OMINION 

SX

 

I

NSTALLATION AND 

O

PERATIONS 

M

ANUAL

 

Lightweight Directory Access Protocol (LDAP) 

Using Dominion SX software revision 2.1 or higher, your Dominion SX unit can authenticate users via 
LDAP/S (LDAP Secure). If your Dominion SX unit does not have revision 2.1, upgrade via the upgrade 
feature and download the appropriate software from http://www.raritan.com/support  to gain access to the 
LDAP feature. 

 

Figure 107 LDAP Configuration Screen 

 

1.

 

Click on the 

LDAP

 tab. 

2.

 

Verify that the LDAP or LDAP(S) server is running, and confirm its IP Address and TCP port number, 
and other information required to communicate with it (check with your LDAP server administrator). 
We recommend you obtain this information before you start configuring LDAP on the Dominion SX. 

3.

 

Click on the 

Enable LDAP 

check box to enable LDAP. 

4.

 

Type a valid IP address in the 

Primary Server

 field. 

5.

 

The default TCP 

Port 

is 389 for LDAP. (For LDAP(S), type 636 in the 

Port 

field). 

6.

 

Type the secret password in the 

Secret 

field. 

7.

 

Re-type the secret password in the 

Confirm Secret 

field.  

8.

 

Type the base directory name in the 

Base DN 

field. 

9.

 

Type search information in the 

Base Search 

field. 

10.

 

Type a valid authorization query string in the 

Authorization Query String 

field. 

11.

 

If you use a secondary server, click on the 

Enable Secondary Server 

check box, and fill in all data for 

the secondary server, as outlined above. 

12.

 

Click [

Update

]. 

13.

 

Click [

Save

].  

 

Summary of Contents for SX32



















































































































































































Reviews:

No comments