Raritan SX32 Installation And Operation Manual Download Page 133

Page: 133 / 178

PPENDIX

ONFIGURING

ISCO

ACS

RADIUS

ERVER

123

To edit existing users, click on the [User Setup] button in the left panel of the screen. Click on the [

List

All

Users

] button and select a user from the list.

Figure 95 New User Display

Once you have selected a user, on the user properties page, scroll down to the

RADIUS (IETF)

section.

Figure 96 User Properties Display

Click on the

Service-Type

check box and select the appropriate service-type from the drop-down

menu:

−

Administrative

: User with this Service-type will have Administrative privileges on the unit and

access to all the ports.

−

NAS Prompt

: User with this Service-Type will have Operator privileges on the unit and access to

all the ports.

−

Login

: User with this Service-Type will have Observer privileges on the unit and access to all

ports.

Click on the [

Submit

] button.

Summary of Contents for SX32



















































































































































































Search results

Summary of Contents for SX32

Reviews:

Raritan SX32, Installation And Operation Manual, Page: 133 / 178

Search results

Summary of Contents for SX32

Reviews: