manualshive.com logo in svg

Raritan SX32, Installation And Operation Manual, Page: 115 / 178

Share
Download
Raritan SX32 Installation And Operation Manual Download Page 115

A

PPENDIX 

C:

 

C

ERTIFICATES

 

105  

 

Remove an Accepted Certificate  

Removing a certificate that you have previously accepted from the unit is the same process whether 
removing an Raritan default certificate or a user-installed third-party certificate. 

1.

 

Open IE and select 

Tools

Æ

Internet Options 

from the main menu. The Internet Options window will 

appear. 

 

Figure 80 Internet Options Display 

2.

 

Click on the 

Content

 tab and click on the [

Certificates

] button. The Certificates Manager window will 

appear 

 

Figure 81 Certificate Manager Display 

3.

 

Scroll through the list of certificates and click on the certificate to be deleted.  

4.

 

Click on the [

Remove

] button.  

5.

 

Click on the [

Close

] button.  

6.

 

Click on the [

OK

] button. 

Summary of Contents for SX32



















































































































































































Reviews:

No comments