Raritan SX32 Installation And Operation Manual Download Page 114

Page: 114 / 178

104 D

OMINION

NSTALLATION AND

PERATIONS

ANUAL

Select the

Certificate store

, the system area where the certificates are stored. If you do not want the

Certificate Manager to select the certificate store automatically, click on the

Place all certificates into

the following store

radio button and click on the [

Browse

] button to choose a file you prefer.

Figure 78 Import Wizard, Select a Certificate Page

10.

Click on the [

Next

] button.

11.

Click on the [

Finish

] button

Figure 79 Certificate Manager Import Wizard, Completion Page

12.

After installing the certificate, close all IE Browsers and open a new IE Browser to continue working.
The next time you connect to the unit, the trusted certificate warning window will not be displayed.

Summary of Contents for SX32



















































































































































































Search results

Summary of Contents for SX32

Reviews:

Raritan SX32, Installation And Operation Manual, Page: 114 / 178

Search results

Summary of Contents for SX32

Reviews: