manualshive.com logo in svg

Raritan SX32, Installation And Operation Manual, Page: 100 / 178

Share
Download
Raritan SX32 Installation And Operation Manual Download Page 100

90 D

OMINION 

SX

 

I

NSTALLATION AND 

O

PERATIONS 

M

ANUAL

 

Note: If the user issues the command lpa enable AFTER changing the default port speed, the next time the 
command lpa enable is used without the optional port speed parameter, the port speed last set, e.g., 38400, 
will be used as a default; to override it, enter the lpa enable command with the new port speed explicitly 
specified, e.g., lpa enable 9600

 

 

Name  

reset

  

 

Description 

reboots unit, which may be required after some configuration changes, and may also be used to log-off all 
users 

 
Service (Telnet and SSH) Configuration 

IMPORTANT NOTE

: 

Telnet

 service should only be enabled when Dominion SX server’s default TCP 

port is NOT set to 23, otherwise the unit will become unresponsive to 

http

 and 

ssh

 clients. If the unit is 

currently set to port 23, please 

change

 it to 2200-2400 range 

BEFORE

 enabling 

Telnet. For Dominion 

SX units that are already running firmware version 2.2.4 or higher, the default port is 51000 and 
telnet can be enabled at any time.

 

Note: The Dominion SX system must be restarted for changes to the service configuration to take effect. 

To check what port the unit is currently installed on, please log into the unit using a browser, and click on 
the Configuration button on the left hand side of the screen. Sample output is shown below: 

 

System Time: Fri Jul 16 16:25:41 2004 

Ethernet Address: 00:60:e0:81:40:a8 

 

Network Configuration: 

  Address IP: 192.168.51.227 (C0A833E3) 

  Subnet mask: 255.255.255.0 (FFFFFF00) 

  Gateway: 192.168.51.137 (C0A8337E) 

  Port Address: 2300                      

Å

This is the port number

 

 

 

Name  

service

 [<

telnet|ssh

> <

enable|disable

>] 

 

Description 

Configure the SSH and Telnet access. 

 

service 

 

With no parameters, the current service configuration is displayed. 

 

service telnet

 <

enable|disable

> 

 

Depending on the parameter, enable or disable telnet access. 

 

service ssh

 <

enable|disable

> 

 

Depending on the parameter, enable or disable SSH access. 

Summary of Contents for SX32



















































































































































































Reviews:

No comments