Raritan PX3TS, User Manual

Page: 794 / 842

Appendix I: Additional PX3TS Information
770
Assumption:
Upper Warning threshold is enabled.
Upper Warning = 20 (degrees Celsius)
Deassertion Hysteresis = 3 (degrees Celsius)
"Deassertion" level = 20-3 = 17 (degrees Celsius)
When the PX3TS detects that a temperature sensor's reading drops
below 20 degrees Celsius, moving from the "above upper warning" range
to the "normal" range, either of the following may occur:

If the temperature falls between 20 and 17 degrees Celsius, the
PX3TS does NOT perform the "deassertion" action.

If the temperature drops to 17 degrees Celsius or lower, the PX3TS
performs the "deassertion" action to announce the end of the "above
upper warning" state.
Default Voltage and Current Thresholds
The following are factory-default voltage and current thresholds applied
to a Raritan power product. There are no default values set for
lower
current thresholds because lower thresholds are not useful.
Availability of diverse thresholds depends on the capability of the model
you purchased.
Single-phase inlets or outlets:

RMS voltage:
Threshold Default value
Lower critical -6% of minimum rating
Lower warning -3% of minimum rating
Upper warning +3% of maximum rating
Upper critical +6% of maximum rating
Hysteresis 2V

RMS current:
Threshold Default value
Upper warning 65% of rating
Upper critical 80% of rating