Raritan PX3TS, User Manual, Page: 662 / 842

Chapter 8: Using the Command Line Interface
638
Enabling or Disabling Load Shedding
This section applies to outlet-switching capable models only.
This command determines whether to enter or exit from the load
shedding mode.
# loadshedding <option>
After performing the above command, PX3TS prompts you to confirm the
operation. Press
y
to confirm or
n
to abort the operation.
To skip the confirmation step, you can add the "/y" parameter to the end
of the command so that the operation is executed immediately.
# loadshedding <option> /y
Variables:

<option> is one of the options:
enable or disable.
Option Description
start Enter the load shedding mode.
stop Quit the load shedding mode.
Example
The following command has the PX3TS enter the load shedding mode.
config:# loadshedding start