Raritan PX3TS, User Manual, Page: 315 / 842

Chapter 6: Using the Web Interface
291
Configuring Network Services
The PX3TS supports the following network communication services.
HTTPS and HTTP enable the access to the web interface. Telnet and SSH
enable the access to the command line interface. See
Using the
Command Line Interface
(on page 461).
By default, SSH is enabled, Telnet is disabled, and all TCP ports for
supported services are set to standard ports. You can change default
settings if necessary.
Note: Telnet access is disabled by default because it communicates
openly and is thus insecure.
Submenu command Refer to
HTTP
Changing HTTP(S) Settings
(on page 292)
SNMP Configuring SNMP Settings (on page 293)
SMTP Server Configuring SMTP Settings (on page 295)
SSH
Changing SSH Settings
(on page 297)
Telnet
Changing Telnet Settings
(on page 298)
Modbus Changing Modbus Settings (on page 298)