Raritan PX3-1000 series, User Manual, Page: 632 / 744

Appendix G: Old PX3 Character LCD Display
610
IPv4 Address
The IP address is available in the Device mode, which is indicated by the
alphabet 'd' shown at the top of the LCD display. Note that the LCD
display only shows the IPv4 address (if available).
Below illustrates the IP address information.
Section Example information
"d" means the LCD display has entered the Device
mode.
The LCD display is showing 192, which is one of
the four IP address octets. It will cycle through
four octets.
"i4" indicates that the IP address shown on the
LCD display is an IPv4 address.
The word "MASTER" indicates the PX3 is the
master device in a cascading configuration.
For a slave device, it shows "SLAVE" instead.
Note: As of release 3.3.10, the "MASTER/SLAVE"
information is no longer available in the bridging
mode, but remains available in the port forwarding
mode.
If you connect your PX3 to the wireless network, a Wi-Fi icon is displayed
at the bottom-right corner.