Raritan PX3-1000 series, User Manual

Page: 627 / 744

Appendix G: Old PX3 Character LCD Display
605
Control Buttons
There are four control buttons.

Up and Down buttons for selecting a specific target, which can be an
inlet, outlet, overcurrent protector, environmental sensor or a device
setting

MODE button for switching between various modes, including:
- Inlet mode
- Outlet mode
- Overcurrent Protector mode
- Device mode
- Sensor mode
- Asset Strip mode, indicated by the word ASSET, for showing the
asset strip information
See
Overview of the LCD Display
(on page 603) for details.

FUNC (Function) button for switching between different data of the
selected target, such as the current, voltage or power readings of a
particular outlet
Operating the LCD Display
After powering on or resetting this product, the LCD display panel shows
the current reading of OUTLET 1 by default before you select a different
target.
Outlet Information
The Outlet mode is displayed as "OUTLET" on the LCD display. By default
the PX3 displays the current reading of OUTLET 1.
Below illustrates the outlet information shown on the LCD display.