Raritan PX3-1000 series, User Manual

Page: 587 / 744

Appendix D: Bulk Configuration or Firmware Upgrade via DHCP/TFTP
565

All required configuration files are available in the TFTP root
directory. See
Bulk Configuration/Upgrade Procedure
(on page
562).
If you are going to upload any PX3 diagnostic file or create a log file in the
TFTP server, the first of the following requirements is also required.

The TFTP server supports the write operation, including file creation
and upload.
In Linux, provide the option "-c" for write support.

Required for uploading the diagnostic file only - the timeout for
file upload is set to one minute or larger.
DHCP IPv4 Configuration in Windows
For those PX3 devices using IPv4 addresses, follow this procedure to
configure your DHCP server. The following illustration is based on
Microsoft
®
Windows Server 2012 system.
Required Windows IPv4 settings in DHCP:
1. Add a new vendor class for Raritan PX3 under IPv4.
a. Right-click the IPv4 node in DHCP to select Define Vendor
Classes.
b. Click Add to add a new vendor class.
c. Specify a unique name for this vendor class and type the binary
codes of "Raritan PDU 1.0" in the New Class dialog.