Raritan PX3-1000 series, User Manual

Page: 503 / 744

Chapter 8: Using the Command Line Interface
481
Example 1 - Creating a User Profile
The following command creates a new user profile and sets two
parameters for the new user.
config:# user create May enable admin
Results:

A new user profile "May" is created.

The new user profile is enabled.

The admin role is assigned to the new user profile.
Example 2 - Modifying a User's Roles
The following command assigns two roles to the user "May."
config:# user modify May roles admin,tester
Results:

The user May has the union of all privileges of "admin" and "tester."
Example 3 - Default Measurement Units
The following command sets all default measurement units at a time.
config:# user defaultpreferences preferredTemperatureUnit F preferredLengthUnit feet
preferredPressureUnit psi
Results:

The default temperature unit is set to Fahrenheit.

The default length unit is set to feet.

The default pressure unit is set to psi.