Raritan PX3-1000 series, User Manual

Page: 462 / 744

Chapter 8: Using the Command Line Interface
440
Determining the Time Setup Method
This command determines the method to configure the system date and
time.
config:# time method <method>
Variables:

<method> is one of the time setup options: manual or ntp.
Mode Description
manual The date and time settings are customized.
ntp The date and time settings synchronize with a
specified NTP server.
Setting NTP Parameters
A time configuration command that is used to set the NTP parameters
begins with
time ntp.
Specifying the Primary NTP Server
This command specifies the primary time server if synchronization with
the NTP server is enabled.
config:# time ntp firstServer <first_server>
Variables:

The <first_server> is the IP address or host name of the primary NTP
server.
Specifying the Secondary NTP Server
This command specifies the primary time server if synchronization with
the NTP server is enabled.
config:# time ntp secondServer <second_server>
Variables:

The <second_server> is the IP address or host name of the
secondary NTP server.