Raritan PX3-1000 series, User Manual

Page: 460 / 744

Chapter 8: Using the Command Line Interface
438
Enabling or Disabling the Read-Only Mode
This command enables or disables the read-only mode for the Modbus
agent.
config:# network services modbus readonly <option>
Variables:

<option> is one of the options: true or false.
Option Description
true The read-only mode is enabled.
false The read-only mode is disabled.
Changing the Modbus Port
This command changes the Modbus port.
config:# network services modbus port <n>
Variables:

<n> is a TCP port number between 1 and 65535. The default Modbus
port is 502.
Enabling or Disabling Service Advertising
This command enables or disables the zero configuration protocol,
which enables advertising or auto discovery of network services. See
Enabling Service Advertising (on page 246) for details.
config:# network services zeroconfig enabled <option>
Variables:

<option> is one of the options:
true or false.
Option Description
true The zero configuration protocol is enabled.
false The zero configuration protocol is disabled.