Raritan PX3-1000 series, User Manual

Page: 450 / 744

Chapter 8: Using the Command Line Interface
428
config:# network wireless allowConnectionWithIncorrectClock <option3>
Variables:

The value of <outer_auth> is
PEAP because PX3 only supports
Protected Extensible Authentication Protocol (PEAP) as the outer
authentication.

The value of <inner_auth> is MSCHAPv2 because PX3 only supports
Microsoft's Challenge Authentication Protocol Version 2 (MSCHAPv2)
as the inner authentication.

<identity> is your user name for the EAP authentication.

<option1> is one of the options: true or false.
Option Description
true Enables the verification of the TLS certificate
chain.
false Disables the verification of the TLS certificate
chain.

<option2> is one of the options:
true or false.
Option Description
true Always make the wireless network connection
successful even though the TLS certificate chain
contains any certificate which is outdated or not
valid yet.
false The wireless network connection is NOT
successfully established when the TLS certificate
chain contains any certificate which is outdated or
not valid yet.

<option3> is one of the options:
true or false.
Option Description
true Make the wireless network connection successful
when the PX3 system time is earlier than the
firmware build before synchronizing with the NTP
server, causing the TLS certificate to become
invalid.