Raritan PX3-1000 series, User Manual

Page: 419 / 744

Chapter 8: Using the Command Line Interface
397
Event Log
The command used to show the event log begins with
show eventlog
.
You can add either the
limit or class parameters or both to show specific
events.
Show the last 30 entries:
# show eventlog
Show a specific number of last entries in the event log:
# show eventlog limit <n>
Show a specific type of events only:
# show eventlog class <event_type>
Show a specific number of last entries associated with a specific
type of events only:
# show eventlog limit <n> class <event_type>
Variables:

<n> is one of the options: all or a number.
Option Description
all Displays all entries in the event log.
An integer
number Displays the specified number of last entries in the
event log. The number ranges between 1 to 10,000.

<event_type> is one of the following event types.
Event type Description
all All events.
device Device-related events, such as system
starting or firmware upgrade event.
userAdministration User management events, such as a new
user profile or a new role.
userActivity User activities, such as login or logout.
pdu Displays PDU-related events, such as entry or
exit of the load shedding mode.