Raritan PX3-1000 series, User Manual

Page: 38 / 744

Chapter 2: Rackmount, Inlet and Outlet Connections
16
Connecting a Locking Line Cord
The PX3 is shipped with either of the following locking line cords.

A line cord with locking clips: A locking inlet on the PDU is required
for this cord.

A line cord with slide release buttons: This line cord automatically
locks after being connected to the inlet. A locking inlet is not
required for this cord.
A locking inlet and/or locking line cord ensure that the line cord is
securely fastened to the inlet.
To connect a cord with locking clips:
Make sure the line cord's locking clips fit into the locking holes at two
sides of the inlet when plugging the cord's connector into the PDU's
locking inlet.
Number Item
1 Locking holes on the inlet
2 Locking clips of the line cord