Raritan PX3-1000 series, User Manual

Page: 372 / 744

Chapter 6: Using the Web Interface
350
Rebooting the PX3 Device
You can remotely reboot the PX3 device via the web interface.
Resetting the PX3 does not interrupt the operation of connected servers
because there is no loss of power to outlets. During and after the reboot,
outlets that have been powered on prior to the reboot remain powered
on, and outlets that have been powered off remain powered off.
Warning: Rebooting the PX3 deletes all webcam snapshots that are
saved on the PX3 locally. See
Viewing Saved Snapshots and
Managing Storage
(on page 355).
To reboot the device:
1. Choose Maintenance > Unit Reset > .
2. Click Reboot to restart the PX3.
3. A message appears, with a countdown timer showing the remaining
time of the operation. It takes about one minute to complete.
4. When the restart is complete, the login page opens.
Note: If you are not redirected to the login page after the restart is
complete, click the text "this link" in the countdown message.
Resetting All Settings to Factory Defaults
You must have the Administrator Privileges to reset all settings of the
PX3 to factory defaults.
Important: Exercise caution before resetting the PX3 to its factory
defaults. This erases existing information and customized settings,
such as user profiles, threshold values, and so on. Only active
energy data and firmware upgrade history are retained.