Raritan PX3-1000 series, User Manual

Page: 353 / 744

Chapter 6: Using the Web Interface
331
Checking Lua Scripts States
Choose Device Settings > Lua Scripts to show the scripts list, which
indicates the current state and settings of each script.
State:
Four script states are available.

New: The script is never executed since the device boot.

Running: The script is currently being executed.

Terminated: The script was once executed, but stops now.

Restarting: The script will be executed. Only the scripts with the
"Restart" column set to "yes" will show this state.
Autostart:
This column indicates whether the checkbox labeled "Start automatically
at system boot" is enabled. See
Writing or Loading a Lua Script (on
page 327).
Restart:
This column indicates whether the checkbox labeled "Restart after
termination" is enabled. See
Writing or Loading a Lua Script (on page
327).
Modifying or Deleting a Script
You can edit an existing script's codes or even replace it with a new
script. Or you can simply remove a unnecessary script from the PX3.
To modify or replace a script:
1. Choose Device Settings > Lua Scripts.
2. Click the desired one in the scripts list.