Chapter 6: Using the Web Interface
257
To install available key and certificate files onto the PX3:
1.
Choose Device Settings > Security > SSL Certificate.
2.
Select the "Upload Key and Certificate" checkbox at the bottom of
the page.
3.
The Key File and Certificate File fields appear. Click
to select the key and/or certificate file.
4.
Click Upload. The selected files are installed.
5.
To verify whether the certificate has been installed successfully,
check the data shown in the Active SSL Certificate section.
Setting Up External Authentication
Important: Raritan uses TLS instead of SSL 3.0 due to published
security vulnerabilities in SSL 3.0. Make sure your network
infrastructure, such as LDAP and mail services, uses TLS rather
than SSL 3.0.
Summary of Contents for PX3-1000 series
