Raritan PX3-1000 series, User Manual

Page: 252 / 744

Chapter 6: Using the Web Interface
230
In this example, NIC-2 (fd07:2fa:6cff:2405::80) is the next hop router for
your PX3 to communicate with any device in the other subnet
fd07:2fa:6cff:1111::0. In the IPv6 "Static Routes" section, you should
specify:
Tip: If you have configured multiple static routes, you can click on any
route and then make changes, use or to re-sort the
priority, or click to delete it.
Interface Names
When your local multiple networks are "directly reachable", you should
select Interface for static routes. Then choose the interface where
another network is connected.
Interface list for PX3:
Interface name Description
BRIDGE When another wired network is connected to the
Ethernet port of your PX3, and your PX3 has been
set to the bridging mode, select this interface
name instead of the Ethernet interface.
ETHERNET When another wired network is connected to the
Ethernet port of your PX3, select this interface
name.
WIRELESS
When another wireless network is connected to
your PX3, select this interface name.
Interface list for PX3-iX7:
Interface name Description
BRIDGE When another wired network is connected to the
Ethernet port of your PX3, and your PX3 has been